Volver al Blog

    Blog

    Una Plataforma, 10+ Oficios: Cómo XBuild Funciona para Cada Contratista.

    XBuild no es solo para techadores. Descubre cómo la estimación con IA funciona en techos, pintura, concreto, revestimiento, HVAC, plomería y más.

    Una Plataforma, 10+ Oficios: Cómo XBuild Funciona para Cada Contratista

    Not Just Another Roofing Tool.

    Most estimating software in the construction industry is built for one trade — usually roofing. If you're a multi-trade contractor, or if you work in painting, concrete, HVAC, or any other specialty, you've probably struggled to find a tool that fits your workflow.

    XBuild is different. It's an AI-powered estimating platform that works across 10+ construction trades from a single interface. No switching between tools. No trade-specific software licenses. One platform for everything.

    Every Trade XBuild Supports.

    Here's a breakdown of the trades XBuild supports and how AI estimating works for each:

    🏠 Roofing.

    The most common use case. XBuild handles:

    • Shingle roofing — GAF, Owens Corning, CertainTeed, and more
    • Metal roofing — standing seam, corrugated, metal shingle
    • Flat roofing — TPO, EPDM, modified bitumen
    • Tile roofing — clay, concrete, synthetic
    • Insurance estimating — insurance-formatted reports with POD documentation

    Upload a roof measurement report from EagleView, HOVER, or any source, describe the project, and get a complete estimate.

    🎨 Painting.

    Interior and exterior painting estimates in minutes:

    • Interior — walls, ceilings, trim, doors, cabinets
    • Exterior — siding, trim, decks, fences
    • Commercial — offices, retail spaces, warehouses
    • Automatic calculation of square footage, coats, and material quantities

    🧱 Concrete.

    Flatwork and structural concrete estimating:

    • Driveways and patios — with finish options (broom, stamped, exposed aggregate)
    • Foundations — footings, slabs, stem walls
    • Sidewalks and curbs — residential and commercial
    • Automatic volume calculations and rebar quantities

    🏗️ Siding.

    All siding types supported:

    • Vinyl siding — with trim and accessories
    • Fiber cement — James Hardie and similar
    • Wood siding — cedar, redwood, engineered wood
    • Stone and brick veneer — natural and manufactured

    ❄️ HVAC.

    Heating, ventilation, and air conditioning:

    • System replacements — furnace, AC, heat pump
    • New installations — ductwork, equipment, controls
    • Commercial HVAC — rooftop units, split systems
    • Proper tonnage and BTU calculations

    🔧 Plumbing.

    Residential and commercial plumbing:

    • Fixture replacements — faucets, toilets, water heaters
    • New construction — rough-in and finish plumbing
    • Remodels — kitchen and bathroom re-pipes
    • Water and sewer lines — repair and replacement

    🪟 Windows & Doors.

    Replacement and new construction:

    • Window replacements — vinyl, wood, fiberglass, aluminum
    • Door installations — entry, patio, sliding, French
    • Commercial storefront — glass and framing systems
    • Automatic unit counts and sizing

    🧤 Insulation.

    All insulation types:

    • Blown-in — attic and wall cavity
    • Spray foam — open cell and closed cell
    • Batt insulation — fiberglass and mineral wool
    • Rigid board — foundation and exterior wall
    • Proper R-value calculations by climate zone

    🌿 Landscaping.

    Hardscaping and softscaping:

    • Hardscaping — patios, retaining walls, walkways
    • Irrigation — sprinkler systems, drip irrigation
    • Landscape design — plantings, grading, drainage
    • Fencing — wood, vinyl, chain link, ornamental

    🪟 Glass & Glazing.

    Commercial and residential glass work:

    • Storefront systems — aluminum and steel framing
    • Curtain walls — structural glass systems
    • Shower enclosures — frameless and semi-frameless
    • Mirror installations — residential and commercial

    Why Multi-Trade Matters.

    If you're a general contractor or a company that offers multiple services, using separate software for each trade is inefficient and expensive. With XBuild:

    Hablar con ventas

    • One login for all your estimating needs
    • One proposal format that looks professional across every trade
    • One team leaderboard that tracks performance across all services
    • Consistent pricing with real-time supplier data

    How It Works Across All Trades.

    The AI estimating process is the same regardless of trade:

    1. Upload measurements — photos, reports, or plans
    2. Describe the project — "paint the interior of a 2,500 sq ft home" or "replace 30 squares of shingle roofing"
    3. Review the estimate — the AI generates materials, labor, and pricing
    4. Create a proposal — branded proposal with Good/Better/Best options
    5. Close the deal — e-sign and payment collection built in

    Real-Time Supplier Pricing Across Trades.

    XBuild integrates with ABC Supply, SRS, and QXO for real-time material pricing. This means your estimates always reflect current market pricing — no more outdated price books or manual price checks.

    Getting Started.

    Whether you're a roofing company looking to expand into painting, a general contractor offering 8 different services, or a specialty contractor in one trade — XBuild has you covered.

    Create your free account and generate your first multi-trade estimate today.

    The most successful contractors in 2026 won't be the ones with the most tools. They'll be the ones with the right tool — one platform that handles everything from estimate to signed deal, across every trade they offer.

    ¿listo para probar XBuild?

    Hablar con ventas

    Hablar con ventas

    Más Artículos.